CENTRAL INSTITUTE OF PLASTICS ENGINEERING & TECHNOLOGY KAMRUP, Institute

Home Study India List of Indian Higher Education

CENTRAL INSTITUTE OF PLASTICS ENGINEERING & TECHNOLOGY KAMRUP

Institute Name: CENTRAL INSTITUTE OF PLASTICS ENGINEERING & TECHNOLOGY KAMRUP
State: Assam
PIN code: 781101
City: P.O. Changsari, Guwahati
District: Kamrup
Address: N.H-31, Near Assam Oil Petrol Pump
Address: P.O. Changsari, Guwahati
Phone: unknown
Fax: unknown
Email: unknown
Web site: www.cipet.gov.in
Management: Central Government
Staff quarter available: Yes
Girl exclusive: No
Is foreign students enrolled: No
Student hostel available: Yes
Awards degree through university: No
Area: 7.85
Constructed area: 9787
Year of establishment: 1999
Year of recognition: 2006
Teaching staff: 5
Non teaching staff: 5
Total: 10
No of student hostel: 2
Hostel count: 2

Location & access map for "CENTRAL INSTITUTE OF PLASTICS ENGINEERING & TECHNOLOGY KAMRUP"



Infrastructure  Accreditation  Scholarships  Faculties and departments  Hostel information  Regular Programme details  Non teaching staff details  Teaching staff details  Teaching staff summary  Student enrollment for Regular-Distance Programmes  Examination Results  

Infrastructure

  • Playground: Yes
    Auditorium: Yes
    Theatre: No
    Library: Yes
    Laboratory: Yes
    Conference hall: Yes
    Health center: Yes
    Gymnasium fitness center: Yes
    Indoor stadium: No
    Common room: No
    Computer center: Yes
    Cafeteria: Yes
    Guest house: Yes
    No of playgrounds: 1
    No of auditoriums: 1
    No of libraries: 1
    No of laboratories: 1
    No of conference halls: 1
    No of health centers: 1
    No of gymnasim fitness centers: 1
    No of computer centers: 1
    No of cafeteria: 1
    No of guest houses: 1
    Separate room for girls: Yes
    No of separate rooms for girls: 1
    Solar power generation: No
    Connectivity nkn: Yes
    Connectivity nmeict: No
    Campus friendly: No
    Grievance redressal mechanism: Yes
    Vigilance cell: Yes
    Opportunity cell: No

Accreditation

  • Is accredited: No

Scholarships

  • Offers scholarship: Yes
    General total: 0
    Genral total female: 0
    Id: 4621678
    Total general total: 0
    Total general females: 0

Faculties and departments

  1. Department: Processing
  2. Department: VTC
  3. Department: Testing
  4. Department: Tool Room
  5. Department: CAD/CAM

Hostel information

  1. Type: Boys Hostel
    Hostelname: CIPET Guwahati Boys Hostel
    Intake capacity: 250
    Students residing: 250
  2. Type: Girls Hostel
    Hostelname: CIPET Guwahati Girls Hostel
    Intake capacity: 32
    Students residing: 32

Regular Programme details

  1. Department: Processing
    Levell: Diploma
    Programme id: 82
    Programme: Diploma-Diploma
    Discipline: Diploma in Plastics Technology
    Discipline group category: Engineering & Technology
    Discipline group id: 26
    Discipline group: Other Engineering & Technology
    Intake: 90
    Admission criterion: All India level Examination
    Duration year: 3
    Duration month: 0
    Type: General
    System: Semester
    Statutory body through which approved: All India Council for Technical Education
  2. Department: Processing
    Levell: PG Diploma
    Programme id: 155
    Programme: PG Diploma-Post Graduate Diploma
    Discipline: Post Graduate Diploma in Plastics Processing & Testing
    Discipline group category: Engineering & Technology
    Discipline group id: 26
    Discipline group: Other Engineering & Technology
    Intake: 90
    Admission criterion: All India level Examination
    Duration year: 1
    Duration month: 6
    Type: General
    System: Semester
    Statutory body through which approved: All India Council for Technical Education
  3. Department: Tool Room
    Levell: Diploma
    Programme id: 82
    Programme: Diploma-Diploma
    Discipline: Diploma in Plastics Mould Technology
    Discipline group category: Engineering & Technology
    Discipline group id: 26
    Discipline group: Other Engineering & Technology
    Intake: 90
    Admission criterion: All India level Examination
    Duration year: 3
    Duration month: 0
    Type: General
    System: Semester
    Statutory body through which approved: All India Council for Technical Education
  4. Department: CAD/CAM
    Levell: Diploma
    Programme id: 82
    Programme: Diploma-Diploma
    Discipline: Post Diploma in Plastics Mould Design
    Discipline group category: Engineering & Technology
    Discipline group id: 26
    Discipline group: Other Engineering & Technology
    Intake: 60
    Admission criterion: All India level Examination
    Duration year: 1
    Duration month: 6
    Type: General
    System: Semester
    Statutory body through which approved: All India Council for Technical Education

Non teaching staff details

  1. Staff type id: 2
    Staff group: Group B
    Sanctioned strength: 0
    Id: 4621688
    Total general total: 1
    Total general females: 0
  2. Staff type id: 2
    Staff group: Group B
    Sanctioned strength: 0
    Id: 4621688
    Total general total: 1
    Total general females: 0
  3. Staff type id: 1
    Staff group: Group B
    Sanctioned strength: 0
    Id: 4621686
    Total general total: 6
    Total general females: 0
  4. Staff type id: 1
    Staff group: Group B
    Sanctioned strength: 0
    Id: 4621686
    Total general total: 6
    Total general females: 0
  5. Staff type id: 1
    Staff group: Group D
    Sanctioned strength: 0
    Id: 4621687
    Total general total: 3
    Total general females: 0
  6. Staff type id: 1
    Staff group: Group D
    Sanctioned strength: 0
    Id: 4621687
    Total general total: 3
    Total general females: 0

Teaching staff details

  1. Department name: CAD/CAM
    Designation: Lecturer
    Grade pay: No entry is required
    Selection mode: Direct
    Id: 4621685
    Total general total: 4
    Total general females: 1
  2. Department name: Processing
    Designation: Lecturer
    Grade pay: No entry is required
    Selection mode: Direct
    Id: 4621681
    Total general total: 4
    Total general females: 1
  3. Department name: VTC
    Designation: Lecturer
    Grade pay: No entry is required
    Selection mode: Direct
    Id: 4621682
    Total general total: 9
    Total general females: 1
  4. Department name: Testing
    Designation: Lecturer
    Grade pay: No entry is required
    Selection mode: Direct
    Id: 4621683
    Total general total: 4
    Total general females: 2
  5. Designation: Principal
    Grade pay: No entry is required
    Selection mode: Direct
    Id: 4621679
    Total general total: 1
    Total general females: 0
  6. Designation: Visiting Teacher
    Grade pay: No entry is required
    Selection mode: Direct
    Id: 4621680
    Total general total: 3
    Total general females: 2
  7. Department name: Tool Room
    Designation: Lecturer
    Grade pay: No entry is required
    Selection mode: Direct
    Id: 4621684
    Total general total: 2
    Total general females: 0

Teaching staff summary

  1. Designation: Principal
    Sanctioned strength: 0
    In position direct: 1
    In position cas: 0
    No of phd teachers: 0
  2. Designation: Lecturer
    Sanctioned strength: 0
    In position direct: 29
    In position cas: 0
    No of phd teachers: 1
  3. Designation: Visiting Teacher
    Sanctioned strength: 0
    In position direct: 3
    In position cas: 0
    No of phd teachers: 0
  4. Designation: ALL
    Sanctioned strength: 0
    In position direct: 33
    In position cas: 0
    No of phd teachers: 1

Student enrollment for Regular-Distance Programmes

  1. Standalone Institution id: 2015
    Faculty name: Processing
    Department name: Diploma
    Levell: 82
    Programme id: Diploma-Diploma
    Programme: 26
    Discipline group id: Other Engineering & Technology
    Discipline group: Diploma in Plastics Technology
    Discipline: General
    Type: 1
    Year: Regular
    Course mode: 4621689
    Id: 40
    Total general total: 1
    Total general females: 10
  2. Standalone Institution id: 2015
    Faculty name: CAD/CAM
    Department name: Diploma
    Levell: 82
    Programme id: Diploma-Diploma
    Programme: 26
    Discipline group id: Other Engineering & Technology
    Discipline group: Post Diploma in Plastics Mould Design
    Discipline: General
    Type: 2
    Year: Regular
    Course mode: 4621698
    Id: 0
    Total general total: 0
    Total general females: 0
  3. Standalone Institution id: 2015
    Faculty name: Processing
    Department name: PG Diploma
    Levell: 155
    Programme id: PG Diploma-Post Graduate Diploma
    Programme: 26
    Discipline group id: Other Engineering & Technology
    Discipline group: Post Graduate Diploma in Plastics Processing & Testing
    Discipline: General
    Type: 1
    Year: Regular
    Course mode: 4621692
    Id: 35
    Total general total: 0
    Total general females: 0
  4. Standalone Institution id: 2015
    Faculty name: Tool Room
    Department name: Diploma
    Levell: 82
    Programme id: Diploma-Diploma
    Programme: 26
    Discipline group id: Other Engineering & Technology
    Discipline group: Diploma in Plastics Mould Technology
    Discipline: General
    Type: 1
    Year: Regular
    Course mode: 4621694
    Id: 31
    Total general total: 1
    Total general females: 4
  5. Standalone Institution id: 2015
    Faculty name: Processing
    Department name: PG Diploma
    Levell: 155
    Programme id: PG Diploma-Post Graduate Diploma
    Programme: 26
    Discipline group id: Other Engineering & Technology
    Discipline group: Post Graduate Diploma in Plastics Processing & Testing
    Discipline: General
    Type: 2
    Year: Regular
    Course mode: 4621693
    Id: 47
    Total general total: 1
    Total general females: 0
  6. Standalone Institution id: 2015
    Faculty name: CAD/CAM
    Department name: Diploma
    Levell: 82
    Programme id: Diploma-Diploma
    Programme: 26
    Discipline group id: Other Engineering & Technology
    Discipline group: Post Diploma in Plastics Mould Design
    Discipline: General
    Type: 1
    Year: Regular
    Course mode: 4621697
    Id: 2
    Total general total: 1
    Total general females: 3
  7. Standalone Institution id: 2015
    Faculty name: Tool Room
    Department name: Diploma
    Levell: 82
    Programme id: Diploma-Diploma
    Programme: 26
    Discipline group id: Other Engineering & Technology
    Discipline group: Diploma in Plastics Mould Technology
    Discipline: General
    Type: 3
    Year: Regular
    Course mode: 4621696
    Id: 27
    Total general total: 0
    Total general females: 6
  8. Standalone Institution id: 2015
    Faculty name: Tool Room
    Department name: Diploma
    Levell: 82
    Programme id: Diploma-Diploma
    Programme: 26
    Discipline group id: Other Engineering & Technology
    Discipline group: Diploma in Plastics Mould Technology
    Discipline: General
    Type: 2
    Year: Regular
    Course mode: 4621695
    Id: 27
    Total general total: 0
    Total general females: 4
  9. Standalone Institution id: 2015
    Faculty name: Processing
    Department name: Diploma
    Levell: 82
    Programme id: Diploma-Diploma
    Programme: 26
    Discipline group id: Other Engineering & Technology
    Discipline group: Diploma in Plastics Technology
    Discipline: General
    Type: 2
    Year: Regular
    Course mode: 4621690
    Id: 20
    Total general total: 1
    Total general females: 7
  10. Standalone Institution id: 2015
    Faculty name: Processing
    Department name: Diploma
    Levell: 82
    Programme id: Diploma-Diploma
    Programme: 26
    Discipline group id: Other Engineering & Technology
    Discipline group: Diploma in Plastics Technology
    Discipline: General
    Type: 3
    Year: Regular
    Course mode: 4621691
    Id: 34
    Total general total: 2
    Total general females: 3

Examination Results

  1. Survey year: 2015
    Course mode: Regular
    Course level: Diploma
    Programme id: 82
    Programme: Diploma-Diploma
    Broad discipline group id: 26
    Broad discipline group: Other Engineering & Technology
    Discipline: Diploma in Plastics Mould Technology
    Appeared female: 1
    Appeared total: 62
    Passed female: 1
    Passed total: 58
    First class passed female: 1
    First class passed total: 50
  2. Survey year: 2015
    Course mode: Regular
    Course level: Diploma
    Programme id: 82
    Programme: Diploma-Diploma
    Broad discipline group id: 26
    Broad discipline group: Other Engineering & Technology
    Discipline: Post Diploma in Plastics Mould Design
    Appeared female: 0
    Appeared total: 0
    Passed female: 0
    Passed total: 0
    First class passed female: 0
    First class passed total: 0
  3. Survey year: 2015
    Course mode: Regular
    Course level: Diploma
    Programme id: 82
    Programme: Diploma-Diploma
    Broad discipline group id: 26
    Broad discipline group: Other Engineering & Technology
    Discipline: Diploma in Plastics Technology
    Appeared female: 10
    Appeared total: 69
    Passed female: 10
    Passed total: 67
    First class passed female: 10
    First class passed total: 58
  4. Survey year: 2015
    Course mode: Regular
    Course level: PG Diploma
    Programme id: 155
    Programme: PG Diploma-Post Graduate Diploma
    Broad discipline group id: 26
    Broad discipline group: Other Engineering & Technology
    Discipline: Post Graduate Diploma in Plastics Processing & Testing
    Appeared female: 0
    Appeared total: 55
    Passed female: 0
    Passed total: 55
    First class passed female: 0
    First class passed total: 55
Recommended: Yes: 0 No: 0Click here to Inform about a mistake 1 Rating:

Click here add new review about: CENTRAL INSTITUTE OF PLASTICS ENGINEERING & TECHNOLOGY KAMRUP (Institute)
×
Wait 20 seconds...!!!