CENTRAL INSTITUTE OF PLASTIC ENGG. & TECHNOLOGY IMPHAL, Institute

Home Study India List of Indian Higher Education

CENTRAL INSTITUTE OF PLASTIC ENGG. & TECHNOLOGY IMPHAL

Institute Name: CENTRAL INSTITUTE OF PLASTIC ENGG. & TECHNOLOGY IMPHAL
State: Manipur
PIN code: 795001
City: TAKYELPAT
District: Imphal West
Address: INDUSTRIAL ESTATE
Address: TAKYELPAT
Phone: unknown
Fax: unknown
Email: unknown
Web site: www.cipet.gov.in
Management: Central Government
Staff quarter available: No
Girl exclusive: No
Is foreign students enrolled: No
Student hostel available: Yes
Awards degree through university: No
Area: 3
Constructed area: 3512
Year of establishment: 1987
Ministry id: 2
Year of recognition: 1996
No of student hostel: 5
Hostel count: 5

Location & access map for "CENTRAL INSTITUTE OF PLASTIC ENGG. & TECHNOLOGY IMPHAL"



Infrastructure  Accreditation  Scholarships  Fellowships  Faculties and departments  Hostel information  Regular Programme details  Non teaching staff details  Teaching staff details  Teaching staff summary  Student enrollment for Regular-Distance Programmes  Examination Results  

Infrastructure

  • Playground: Yes
    Auditorium: No
    Theatre: No
    Library: Yes
    Laboratory: Yes
    Conference hall: Yes
    Health center: No
    Gymnasium fitness center: Yes
    Indoor stadium: No
    Common room: No
    Computer center: Yes
    Cafeteria: Yes
    Guest house: Yes
    No of playgrounds: 1
    No of libraries: 1
    No of laboratories: 2
    No of conference halls: 1
    No of gymnasim fitness centers: 1
    No of computer centers: 1
    No of cafeteria: 1
    No of guest houses: 2
    Separate room for girls: No
    Solar power generation: No
    Connectivity nkn: Yes
    Connectivity nmeict: No
    No of books: 1013
    No of journals: 2
    Campus friendly: No
    Grievance redressal mechanism: Yes
    Vigilance cell: Yes
    Opportunity cell: No

Accreditation

  • Is accredited: No

Scholarships

  • Offers scholarship: Yes
    General total: 0
    Genral total female: 0
    Id: 4731366
    Total general total: 0
    Total general females: 0

Fellowships

  • Has fellowships: Yes
    Id: 4731367
    Total general total: 1
    Total general females: 1

Faculties and departments

  1. Department: Tool Room
  2. Department: Plastics Testing
  3. Department: Plastics Processing
  4. Department: CAD CAM

Hostel information

  1. Type: Boys Hostel
    Hostelname: SK Hostel
    Intake capacity: 40
    Students residing: 12
  2. Type: Girls Hostel
    Hostelname: New Hostel_2
    Intake capacity: 60
    Students residing: 20
  3. Type: Boys Hostel
    Hostelname: New Hostel_1
    Intake capacity: 104
    Students residing: 104
  4. Type: Boys Hostel
    Hostelname: Gongotri Hostel
    Intake capacity: 36
    Students residing: 36
  5. Type: Boys Hostel
    Hostelname: Old Boys Hostel
    Intake capacity: 20
    Students residing: 20

Regular Programme details

  1. Department: Tool Room
    Levell: Diploma
    Programme id: 82
    Programme: Diploma-Diploma
    Discipline: Diploma in Plastics Mould Technology
    Discipline group category: Engineering & Technology
    Discipline group id: 26
    Discipline group: Other Engineering & Technology
    Intake: 20
    Admission criterion: All India level Examination
    Duration year: 3
    Duration month: 0
    Type: Self Financing
    System: Semester
    Statutory body through which approved: All India Council for Technical Education
  2. Department: CAD CAM
    Levell: Diploma
    Programme id: 82
    Programme: Diploma-Diploma
    Discipline: Post Diploma in Plastics Mould Design
    Discipline group category: Engineering & Technology
    Discipline group id: 26
    Discipline group: Other Engineering & Technology
    Intake: 20
    Admission criterion: All India level Examination
    Duration year: 1
    Duration month: 6
    Type: Self Financing
    System: Semester
    Statutory body through which approved: All India Council for Technical Education
  3. Department: Plastics Processing
    Levell: Diploma
    Programme id: 82
    Programme: Diploma-Diploma
    Discipline: Diploma in Plastics Technology
    Discipline group category: Engineering & Technology
    Discipline group id: 26
    Discipline group: Other Engineering & Technology
    Intake: 60
    Admission criterion: All India level Examination
    Duration year: 3
    Duration month: 0
    Type: Self Financing
    System: Semester
    Statutory body through which approved: All India Council for Technical Education
  4. Department: Plastics Processing
    Levell: PG Diploma
    Programme id: 155
    Programme: PG Diploma-Post Graduate Diploma
    Discipline: Post Graduate Diploma in Plastics Processing and Testing
    Discipline group category: Engineering & Technology
    Discipline group id: 26
    Discipline group: Other Engineering & Technology
    Intake: 40
    Admission criterion: All India level Examination
    Duration year: 1
    Duration month: 6
    Type: Self Financing
    System: Semester
    Statutory body through which approved: All India Council for Technical Education

Non teaching staff details

  1. Staff type id: 1
    Staff group: Group C
    Sanctioned strength: 6
    Id: 4731378
    Total general total: 0
    Total general females: 0
  2. Staff type id: 1
    Staff group: Group C
    Sanctioned strength: 6
    Id: 4731378
    Total general total: 0
    Total general females: 0
  3. Staff type id: 1
    Staff group: Group B
    Sanctioned strength: 2
    Id: 4731377
    Total general total: 0
    Total general females: 0
  4. Staff type id: 1
    Staff group: Group B
    Sanctioned strength: 2
    Id: 4731377
    Total general total: 0
    Total general females: 0
  5. Staff type id: 1
    Staff group: Group D
    Sanctioned strength: 3
    Id: 4731379
    Total general total: 1
    Total general females: 0
  6. Staff type id: 1
    Staff group: Group D
    Sanctioned strength: 3
    Id: 4731379
    Total general total: 1
    Total general females: 0
  7. Staff type id: 2
    Staff group: Group D
    Sanctioned strength: 2
    Id: 4731380
    Total general total: 0
    Total general females: 0
  8. Staff type id: 2
    Staff group: Group D
    Sanctioned strength: 2
    Id: 4731380
    Total general total: 0
    Total general females: 0

Teaching staff details

  1. Department name: Plastics Testing
    Designation: Lecturer
    Grade pay: No entry is required
    Selection mode: CAS
    Id: 4731372
    Total general total: 1
    Total general females: 1
  2. Department name: Plastics Testing
    Designation: Visiting Teacher
    Grade pay: No entry is required
    Selection mode: Direct
    Id: 4731373
    Total general total: 0
    Total general females: 0
  3. Department name: Tool Room
    Designation: Lecturer
    Grade pay: No entry is required
    Selection mode: Direct
    Id: 4731369
    Total general total: 0
    Total general females: 0
  4. Department name: Tool Room
    Designation: Tutor
    Grade pay: No entry is required
    Selection mode: Direct
    Id: 4731370
    Total general total: 0
    Total general females: 0
  5. Department name: Tool Room
    Designation: Demonstrator
    Grade pay: No entry is required
    Selection mode: Direct
    Id: 4731371
    Total general total: 0
    Total general females: 0
  6. Department name: CAD CAM
    Designation: Lecturer
    Grade pay: No entry is required
    Selection mode: Direct
    Id: 4731376
    Total general total: 0
    Total general females: 0
  7. Designation: Principal
    Grade pay: No entry is required
    Selection mode: CAS
    Id: 4731368
    Total general total: 1
    Total general females: 0
  8. Department name: Plastics Processing
    Designation: Lecturer
    Grade pay: No entry is required
    Selection mode: CAS
    Id: 4731374
    Total general total: 2
    Total general females: 0
  9. Department name: Plastics Processing
    Designation: Tutor
    Grade pay: No entry is required
    Selection mode: Direct
    Id: 4731375
    Total general total: 2
    Total general females: 1

Teaching staff summary

  1. Designation: Principal
    Sanctioned strength: 1
    In position direct: 0
    In position cas: 1
  2. Designation: Lecturer
    Sanctioned strength: 16
    In position direct: 2
    In position cas: 3
  3. Designation: Tutor
    Sanctioned strength: 10
    In position direct: 4
    In position cas: 0
  4. Designation: Demonstrator
    Sanctioned strength: 10
    In position direct: 2
    In position cas: 0
  5. Designation: Visiting Teacher
    Sanctioned strength: 10
    In position direct: 10
    In position cas: 0
    No of phd teachers: 1
  6. Designation: ALL
    Sanctioned strength: 47
    In position direct: 18
    In position cas: 4
    No of phd teachers: 1

Student enrollment for Regular-Distance Programmes

  1. Standalone Institution id: 2015
    Faculty name: Plastics Processing
    Department name: PG Diploma
    Levell: 155
    Programme id: PG Diploma-Post Graduate Diploma
    Programme: 26
    Discipline group id: Other Engineering & Technology
    Discipline group: Post Graduate Diploma in Plastics Processing and Testing
    Discipline: Self Financing
    Type: 2
    Year: Regular
    Course mode: 4731388
    Id: 24
    Total general total: 1
    Total general females: 0
  2. Standalone Institution id: 2015
    Faculty name: Plastics Processing
    Department name: Diploma
    Levell: 82
    Programme id: Diploma-Diploma
    Programme: 26
    Discipline group id: Other Engineering & Technology
    Discipline group: Diploma in Plastics Technology
    Discipline: Self Financing
    Type: 3
    Year: Regular
    Course mode: 4731386
    Id: 8
    Total general total: 0
    Total general females: 9
  3. Standalone Institution id: 2015
    Faculty name: Tool Room
    Department name: Diploma
    Levell: 82
    Programme id: Diploma-Diploma
    Programme: 26
    Discipline group id: Other Engineering & Technology
    Discipline group: Diploma in Plastics Mould Technology
    Discipline: Self Financing
    Type: 3
    Year: Regular
    Course mode: 4731383
    Id: 0
    Total general total: 0
    Total general females: 0
  4. Standalone Institution id: 2015
    Faculty name: Plastics Processing
    Department name: Diploma
    Levell: 82
    Programme id: Diploma-Diploma
    Programme: 26
    Discipline group id: Other Engineering & Technology
    Discipline group: Diploma in Plastics Technology
    Discipline: Self Financing
    Type: 2
    Year: Regular
    Course mode: 4731385
    Id: 17
    Total general total: 2
    Total general females: 7
  5. Standalone Institution id: 2015
    Faculty name: Tool Room
    Department name: Diploma
    Levell: 82
    Programme id: Diploma-Diploma
    Programme: 26
    Discipline group id: Other Engineering & Technology
    Discipline group: Diploma in Plastics Mould Technology
    Discipline: Self Financing
    Type: 1
    Year: Regular
    Course mode: 4731381
    Id: 12
    Total general total: 0
    Total general females: 1
  6. Standalone Institution id: 2015
    Faculty name: Tool Room
    Department name: Diploma
    Levell: 82
    Programme id: Diploma-Diploma
    Programme: 26
    Discipline group id: Other Engineering & Technology
    Discipline group: Diploma in Plastics Mould Technology
    Discipline: Self Financing
    Type: 2
    Year: Regular
    Course mode: 4731382
    Id: 6
    Total general total: 0
    Total general females: 6
  7. Standalone Institution id: 2015
    Faculty name: CAD CAM
    Department name: Diploma
    Levell: 82
    Programme id: Diploma-Diploma
    Programme: 26
    Discipline group id: Other Engineering & Technology
    Discipline group: Post Diploma in Plastics Mould Design
    Discipline: Self Financing
    Type: 2
    Year: Regular
    Course mode: 4731390
    Id: 0
    Total general total: 0
    Total general females: 0
  8. Standalone Institution id: 2015
    Faculty name: Plastics Processing
    Department name: Diploma
    Levell: 82
    Programme id: Diploma-Diploma
    Programme: 26
    Discipline group id: Other Engineering & Technology
    Discipline group: Diploma in Plastics Technology
    Discipline: Self Financing
    Type: 1
    Year: Regular
    Course mode: 4731384
    Id: 20
    Total general total: 5
    Total general females: 3
  9. Standalone Institution id: 2015
    Faculty name: CAD CAM
    Department name: Diploma
    Levell: 82
    Programme id: Diploma-Diploma
    Programme: 26
    Discipline group id: Other Engineering & Technology
    Discipline group: Post Diploma in Plastics Mould Design
    Discipline: Self Financing
    Type: 1
    Year: Regular
    Course mode: 4731389
    Id: 0
    Total general total: 0
    Total general females: 0
  10. Standalone Institution id: 2015
    Faculty name: Plastics Processing
    Department name: PG Diploma
    Levell: 155
    Programme id: PG Diploma-Post Graduate Diploma
    Programme: 26
    Discipline group id: Other Engineering & Technology
    Discipline group: Post Graduate Diploma in Plastics Processing and Testing
    Discipline: Self Financing
    Type: 1
    Year: Regular
    Course mode: 4731387
    Id: 13
    Total general total: 1
    Total general females: 0

Examination Results

  1. Survey year: 2015
    Course mode: Regular
    Course level: Diploma
    Programme id: 82
    Programme: Diploma-Diploma
    Broad discipline group id: 26
    Broad discipline group: Other Engineering & Technology
    Discipline: Diploma in Plastics Technology
    Appeared female: 8
    Appeared total: 49
    Passed female: 7
    Passed total: 45
    First class passed female: 7
    First class passed total: 45
  2. Survey year: 2015
    Course mode: Regular
    Course level: Diploma
    Programme id: 82
    Programme: Diploma-Diploma
    Broad discipline group id: 26
    Broad discipline group: Other Engineering & Technology
    Discipline: Post Diploma in Plastics Mould Design
    Appeared female: 0
    Appeared total: 4
    Passed female: 0
    Passed total: 4
    First class passed female: 0
    First class passed total: 2
  3. Survey year: 2015
    Course mode: Regular
    Course level: Diploma
    Programme id: 82
    Programme: Diploma-Diploma
    Broad discipline group id: 26
    Broad discipline group: Other Engineering & Technology
    Discipline: Diploma in Plastics Mould Technology
    Appeared female: 0
    Appeared total: 0
    Passed female: 0
    Passed total: 0
    First class passed female: 0
    First class passed total: 0
  4. Survey year: 2015
    Course mode: Regular
    Course level: PG Diploma
    Programme id: 155
    Programme: PG Diploma-Post Graduate Diploma
    Broad discipline group id: 26
    Broad discipline group: Other Engineering & Technology
    Discipline: Post Graduate Diploma in Plastics Processing and Testing
    Appeared female: 0
    Appeared total: 43
    Passed female: 0
    Passed total: 43
    First class passed female: 0
    First class passed total: 43
Recommended: Yes: 0 No: 0Click here to Inform about a mistake 2 Rating:

Click here add new review about: CENTRAL INSTITUTE OF PLASTIC ENGG. & TECHNOLOGY IMPHAL (Institute)
×
Wait 20 seconds...!!!